|
Sonus SFX 6” polishing pads are precision made
for use with dual-action polishers or rotary buffer. Sonus SFX
pads feature engineered prepolymer foams that are hydrophilic,
meaning they quickly absorb polish and swell. The prepolymer
foam offers superior durability and generates just the right
amount of work (heat) to offer great polishing action, even with
a dual-action machine.
The hydrophilic nature of the SFX pads improves polish “hang
time”, which is the amount of buffing you can perform before
your polish dries out, forcing you to stop and apply more
polish. The benefit is an even and complete break down of the
polishing oxides for a perfectly clear final finish.
Unlike most foam pads, which have their Velcro backing applied
after the foam disk is cut, the Velcro backing is applied to the
SFX foam in its sheet form during the foam manufacturing
process. The lamination process creates a complete bond between
the Velcro and foam that will not delaminate under the extreme
stress of a high performance dual-action polisher.
Sonus SFX pads are very dense. They have a small, uniform cell
structure that efficiently transmits energy to the polish,
allowing it create a finer paint finish. Even the SFX-3 Final
Finish pad is dense, whereas most final finish pads are soft and
spongy. The density allows pressure to be applied to the pad,
without forcing out all of the polish, for a superior final
finish.
NOTE: Sonus SFX pads must be use in
conjunction with a Velcro backing plate from 4.75" to 6". For
improved polishing safety, a flexible backing plate is
recommended.
More about SFX pads and proper polishing...
Proper polishing of a paint finish requires several grades
(abrasive levels) of polish. You start with a cutting polish
(fine compound) to remove heavy oxidation, scratches, heavy
swirl marks and stains. When these blemishes are gone or
diminished to the point where they are no longer noticeable, you
switch to a polish with moderate abrasiveness to finesse
remaining trouble areas (without removing excessive paint
thickness) and restore overall gloss. To add exceptional gloss,
and maintain the high gloss finish, you use an ultra-fine polish
with very low abrasives. Just as each of these polishing steps
requires a different level of polish, each step demands a
different density foam buffing pad.Sonus SFX 6” polishing
pads are precision made for use with dual-action polishers or a
rotary buffer. Sonus SFX pads feature engineered prepolymer
foams that are hydrophilic, meaning they quickly absorb polish
and swell. The prepolymer foam offers superior durability and
generates just the right amount of work (heat) to offer great
polishing action, even with a dual-action machine.
The hydrophilic nature of the SFX pads improves polish “hang
time”, which is the amount of buffing you can perform before
your polish dries out, forcing you to stop and apply more
polish. The benefit is an even and complete break down of the
polishing oxides for a perfectly clear final finish.
Unlike most foam pads, which have their Velcro backing
applied after the foam disk is cut, the Velcro backing is
applied to the SFX foam in its sheet form during the foam
manufacturing process. The lamination process creates a complete
bond between the Velcro and foam that will not delaminate under
the extreme stress of a high performance dual-action polisher.
Sonus SFX pads are very dense. They have a small, uniform
cell structure that efficiently transmits energy to the polish,
allowing it create a finer paint finish. For a glowing final
finish, the SFX-3 Final Finish pad is super soft for polishing
and waxing to a jewel-like finish.
|
| SONUS SFX FOAM PAD KIT |
$40.00 |
|
Yellow Pad - Engineered to work with a dual-action
polisher to safely to remove swirls and paint damage.
A fast-action, swirl-free machine
polishing pad for trouble-free repair of damaged,
weathered and neglected paint. Use with Sonus Restore
(SFX-1) or other compounds and paint cleaners designed
to remove 1200 grit sanding marks.
White Pad - Removes light swirl
marks and finish marring while enhancing gloss.
A gloss-enhancing, swirl-reducing
polishing pad for the regular care of paint with minor
imperfections. Use with Sonus Enhance (SFX-2) or
other “swirl-remover” machine polish formulas.
Red Pad - Ultra-soft final finish
pad. Applies super-thin films of sealant for fast
removal!
An advanced pad for applying fine
polishes, glazes and waxes. New polymer foam technology
allows the pad to be used at higher speeds to achieve
outstanding final gloss with low polish or wax residue
(thin film). Use with Sonus Final Finish (SFX-3),
Sonus Paintwork Cleanser, machine glazes, sealants and
liquid waxes.
Green Bonnets - The Sonus
Microfiber Buffing Bonnet is the easy way to remove
polish and wax residue and bring out a radiant,
high-gloss finish.
Use Sonus Microfiber Buffing
Bonnets after polishing to remove light polish residues.
The bonnets are superb for removing single-step products
like Klasse All-In-One.
This kit contains:
All three Sonus SFX foam polishing pads, plus two
microfiber buffing bonnets for fast, easy removal of
polish and wax films.
|
 |
|
|
Item in Stock |
|
| SONUS SFX-1 SWIRL & SCRATCH
REMOVER PAD |
$13.00 |
|
A fast-action, swirl-free machine polishing pad for
trouble-free repair of damaged, weathered and neglected
paint. Use with Sonus Restore (SFX-1) or other compounds
and paint cleaners designed to remove 1200 grit sanding
marks. Only use with a dual-action polisher or a rotary
buffer in conjunction with a 5” flexible Velcro backing
plate.
WARNING: This pad feels soft but can be
aggressive when used at speeds in excess of 700 RPM
(rotary) or 3000 OPM (dual-action). To prevent paint
burns or removing excessive paint film thickness, work
at slower machine speeds. Keep machine moving and check
your work often.
|
 |
|
|
Item in Stock |
|
| SONUS SFX-2 PAINT POLISHING
PAD |
$13.00 |
|
A gloss-enhancing, swirl-reducing polishing pad for
the regular care of paint with minor imperfections.
Use with Sonus Enhance (SFX-2) or other
“swirl-remover” machine polish formulas. For use with a
dual-action polisher or a rotary buffer in conjunction
with a 5” Velcro backing plate.
NOTE: With heavy polishes, this pad may be
aggressive when used at speeds in excess of 1,000 RPM
(rotary) or 3500 OPM (dual-action). To prevent paint
burns, work at slower machine speeds. Keep machine
moving and check your work often.
|
 |
|
|
Item in Stock |
|
| SONUS SFX-3 FINAL FINISHING
PAD |
$13.00 |
|
NEW, ultra-soft foam! Applies super-thin films
of sealant for fast removal!
An advanced pad for applying fine polishes, glazes
and waxes. New pre-polymer foam technology allows the
pad to be used at higher speeds to achieve outstanding
final gloss with low polish or wax residue (thin film).
Use with Sonus Final Finish, Sonus Paintwork
Cleanser, machine glazes, sealants and liquid waxes. For
use with a dual-action polisher or a rotary buffer in
conjunction with a 5” to 6.5” Velcro backing plate. Use
a Sonus Der Wunder Bonnet over a clean, dry SFX-3 Final
Finish pad to remove polish and wax films.
|
 |
|
|
Item in Stock |
|
| SONUS DAS BUFFING BONNETS (2) |
$8.00 |
|
The Sonus DAS Buffing Bonnet is the easy way to
remove polish and wax residue and bring out a radiant,
high-gloss finish.
The polishing advantage of our edgeless microfiber
towel is now available in the Sonus DAS Buffing Bonnet
for your Porter Cable Polisher. Our DAS Buffing Bonnets
can be used after polishing to remove light polish
residues. These bonnets are superb for removing
single-step products like Klasse All-In-One and Sonus
SwilrBuster Polish.
The DAS Buffing Bonnet has just the right texture to
apply a super thin layer of Klasse High Gloss Sealant
Glaze, which require a very light coating for easy
removal and best gloss. The DAS Buffing Bonnet fits over
any 6-7 inch foam pad.
Pkg/2 6" Buffing Bonnets.
|
 |
|
|
Item in Stock |
|
|
Sonus SFX 4" Foam Polishing Pads |
| SONUS SFX-1 4" SPOT PAD |
$6.50 |
|
The Sonus SFX-1 4" Spot Pad is the ideal solution for
polishing out surface scratches, water or bird spot
etching and heavy swirl marks when using a Porter Cable
7424 dual-action machine. Larger pads simply
cannot apply enough energy to the polish to effectively
"cut" the paint to make the repair. The The Sonus
SFX-1 4" Spot Pad focuses the dual-action machine's
energy on a smaller area to get more work out of the
polish.
Use with Sonus Restore (SFX-1) or other compounds and
paint cleaners designed to remove 1200 grit sanding
marks. When used in conjunction with the proper backing
plate, the Sonus SFX-1 4" Spot Pad can be used with a
dual-action polisher, rotary buffer or cordless drill.
The Sonus SFX-1 4" Spot Pad is an excellent
solution for buffing clear plastic headlight lenses,
too. Use in conjunction with your favorite plastic
polish and a cordless drill motor to remove scratches
and light clouding caused by UV exposure.
NOTE: This pad feels soft but can be
aggressive when used at speeds in excess of 700 RPM
(rotary) or 3000 OPM (dual-action). To prevent paint
burns or removing excessive paint film thickness, work
at slower machine speeds. Keep machine moving and check
your work often.
CYCLO POLISHER USERS: This pad also fits the
Cyclo Polisher and is an excellent choice for buffing
out heavy oxidation, swirls, stains and other stubborn
imperfections.
|
 |
|
|
Item in Stock |
|
| SONUS SFX-2 4" SPOT PAD |
$6.50 |
|
The right solution for polishing tight areas.
The Sonus SFX-2 4" Spot Pad is perfect for polishing
tight areas where more control over the pad is required.
Used after buffing out a paint flaw with the SFX-1 4"
Spot Pad to restore full gloss and blend the repair
area.
Use with Sonus Enhance (SFX-2) or other "swirl
remover" machine polishes to achieve a high-gloss
finish. When used in conjunction with the proper backing
plate, the Sonus SFX-2 4" Spot Pad can be used with a
dual-action polisher, rotary buffer or cordless drill.
The Sonus SFX-2 4" Spot Pad is an excellent solution
for maintaining clear plastic headlight lenses, too.
Use with a light plastic polish and a cordless drill
motor to keep plastic lenses crystal clear.
NOTE: With heavy polishes, this pad may be
aggressive when used at speeds in excess of 1,000 RPM
(rotary) or 3500 OPM (dual-action). To prevent paint
burns, work at slower machine speeds. Keep machine
moving and check your work often.
CYCLO POLISHER USERS: This pad also fits the
Cyclo Polisher and is an excellent choice for light
polishing and restoring gloss.
|
 |
|
|
Item in Stock |
|
| SONUS SFX-3 4" SPOT PAD |
$6.50 |
|
You've never experienced waxing like this!
The Sonus SFX-3 Spot Pad is the ultimate wax
applicator. Using the Ultimate Detailing Machine
or Porter Cable 7424 dual-action polisher, the Sonus
SFX-3 Spot Pad applies waxes and sealants in an
overlapping motion, insuring complete coverage for a
tight seal. The ultra-fine, dense foam of the
Sonus SFX-3 Spot Pad lays down a super thin coating of
wax or sealant for easy removal.
CYCLO POLISHER USERS: This pad also fits the
Cyclo Polisher and is an excellent choice for waxing or
final polishing on show car finishes.
|
 |
|
|
Item in Stock |
|
| 3.5" DUAL-ACTION SPOT PAD
BACKING PLATE |
$11.99 |
Use this 3.5 inch flexible, urethane backing plate to
securely hold all 4-inch foam spot pads. This is the
perfect size for spot repairs as it allows you to focus
your polisher's energy on a small area. Your machine
will achieve more work and you won't affect the
surrounding paint.
Works will all Porter Cable 6" dual-action polishers and the Ultimate Detailing Machine.
Use with Sonus SFX Spot Pads for paint repairs,
polishing tight areas and waxing. |
 |
|
|
Item in Stock |
|
| SONUS 6" DAS FLEXPLATE |
$19.00 |
|
The Sonus 6" DAS
FlexPlate, which requires only 0.25 pounds per square
inch of pad pressure to begin flexing, is the perfect
match for all Sonus SFX 6" foam pads. With its unique 30
degree beveled edge, fully-laminated Velcro backing, and
advanced polyurethane foam construction, the Sonus DAS
FlexPlate adds a new level of safety and quality. When
used with SFX 6” foam pads, the Sonus DAS FlexPlate is
suitably balanced for use with the standard Porter Cable
7424 polisher and the Ultimate Detailing Machine.
|
 |
|
|
Item in Stock |
|
| SONUS 5" DAS FLEXPLATE |
$15.95 |
|
The Sonus DAS FlexPlate replaces the standard Porter
Cable polishing pad allowing pads to be changed quickly
and easily. The Sonus DAS FlexPlate requires only 0.15
pounds per square inch of pad pressure to begin flexing,
offer better comfort (less hopping) and impoved
polishing safety. With its unique 30 degree beveled
edge, fully-laminated Velcro backing, and advanced
polyurethane foam construction, the Sonus DAS FlexPlate
adds a new level of safety and quality. When used with
6” to 7” foam pads, the Sonus DAS FlexPlate is perfectly
balanced for use with the standard Porter Cable 7424 and
the Ultimate Detailing Machine.
|
 |
|
|
Item in Stock |
|
|
